UNV NVR501-08B-LP8 8-Channel 8 PoE Network Video Recorder

PoE Network Video Recorder
Uniview NVR501-08B-LP8
Channels
8
PoE Ports
8
Max Recording
16 MP
Storage
1 SATA
The Uniview NVR501-08B-LP8 is an 8-channel PoE network video recorder designed for small to mid-size IP camera systems. It supports Ultra 265, H.265, and H.264 video formats, Plug & Play PoE camera connection, HDMI and VGA simultaneous output, ANR technology, and cloud upgrade support for reliable everyday surveillance.
Key features
✦ Supports Ultra 265 / H.265 / H.264 video formats
✦ Supports 8-channel IP camera input
✦ Plug & Play with 8 independent PoE network interfaces
✦ Supports mainstream cameras with ONVIF Profile S, Profile G, Profile T, and RTSP protocols
✦ Supports HDMI and VGA simultaneous output
✦ Up to 16 Megapixels recording resolution
✦ ANR technology helps enhance storage reliability when the network is disconnected
✦ Supports cloud upgrade
Built-In PoE Convenience
With 8 built-in PoE ports, compatible IP cameras can receive both power and network connection through a single Ethernet cable, helping simplify installation.
Reliable Recording
ANR technology helps improve recording reliability during temporary network interruptions, while Ultra 265 compression helps reduce storage usage.
Specifications
✦ Model: NVR501-08B-LP8
✦ Type: 8-channel PoE network video recorder
✦ Video Compression: Ultra 265, H.265, H.264
✦ IP Video Input: 8 channels
✦ PoE Interfaces: 8 independent PoE network interfaces
✦ Decoding Capability: Ultra 265 / H.265: 2 × 16MP @ 30, 2 × 12MP @ 30, 4 × 4K @ 30, 6 × 5MP @ 30, 8 × 4MP @ 30
✦ H.264 Decoding: 2 × 16MP @ 30, 2 × 12MP @ 30, 2 × 4K @ 30, 4 × 5MP @ 30, 6 × 4MP @ 30, 8 × 3MP @ 30
✦ Audio Compression: G.711A, G.711U
✦ Incoming Bandwidth: 80Mbps
✦ Outgoing Bandwidth: 64Mbps
✦ Remote Users: Up to 128 users
✦ Video Output: HDMI and VGA simultaneous output
✦ Storage: 1 × SATA HDD interface
✦ Camera Compatibility: ONVIF Profile S / G / T and RTSP supported
PoE Advantage: This NVR includes built-in PoE ports, allowing compatible cameras to connect directly to the recorder without requiring a separate PoE switch.
Third-Party Camera Notice: Third-party IP cameras may not work Plug & Play immediately. Additional configuration may be required, such as manually adding the camera by IP address, adjusting ONVIF settings, entering the camera username/password, or confirming protocol compatibility.
Note: Product specifications may vary by firmware version, region, hard drive configuration, camera brand, or system setup. Please confirm compatibility before ordering.