40W Solar Panel Kit 128Wh LiFePO4 Battery 12V 2.5A CCTV Camera Power

40W Solar Power Kit with 128Wh LiFePO4 Battery Bracket for 12V Cameras
IMPORTANT: SECURITY CAMERA IS NOT INCLUDED.
PRODUCT DESCRIPTION
Provide off-grid power for a compatible 12V CCTV, PTZ, Wi-Fi or cellular security camera with this 40W solar power kit. The system combines two 20W monocrystalline solar panels with a rechargeable 128Wh LiFePO4 battery, integrated solar charge controller and heavy-duty steel camera mounting bracket.
The system provides a regulated 12V DC output with a maximum current of 2.5A through a standard 2.1mm DC power connector. It is suitable for farms, barns, stables, gates, construction sites, parking areas and other remote locations where conventional electrical power is unavailable.
The battery and controller are enclosed inside the steel mounting bracket, creating a compact power and mounting solution for compatible 12V security cameras.
KEY FEATURES
Total solar-panel output: 40W
Two 20W monocrystalline solar panels
Integrated LiFePO4 rechargeable battery
Battery capacity: 40Ah at 3.2V
Total battery energy: 128Wh
Regulated camera power output: 12V DC
Maximum camera output current: 2.5A
Standard 2.1mm DC power connector
Integrated solar charge controller
Battery-capacity status display
Power on/off switch
Heavy-duty 2.5mm steel mounting bracket
Battery and controller enclosed inside the bracket
IP66-rated bracket housing
Designed for compatible CCTV, PTZ, Wi-Fi, 4G and 5G cameras
SOLAR-PANEL SPECIFICATIONS
Panel type: Monocrystalline silicon
Total rated output: 40W
Panel configuration: Two 20W panels
Individual panel dimensions: 350 × 400 × 20mm
Maximum charging voltage: 6V
Maximum charging current: 6.6A
BATTERY SPECIFICATIONS
Battery chemistry: Lithium iron phosphate (LiFePO4)
Battery capacity: 40Ah at 3.2V
Total stored energy: 128Wh
Camera output: 12V DC
Maximum camera output current: 2.5A
Expected service life: Approximately 3–5 years
Rated life: Up to approximately 800 charging cycles
Battery reverse-connection protection
Solar-panel reverse-connection protection
Protection against battery discharge through the solar panels
SOLAR CHARGE CONTROLLER
Aluminum construction for improved heat dissipation
Integrated battery-capacity display
Power on/off switch
Battery-protection functions
Automatic charging and power recovery when sufficient sunlight becomes available
BATTERY-DISPLAY INDICATORS
The controller’s approximate battery-status readings are:
Above 3.3V: Approximately 95% capacity or higher
Above 3.2V: Approximately 60% capacity or higher
Below 3.1V: Approximately 10% capacity or lower
When the battery voltage falls below approximately 3.1V, the controller may shut down the camera output to protect the battery from excessive discharge. Operation should resume automatically after sufficient solar charging.
BRACKET SPECIFICATIONS
Heavy-duty stamped-steel construction
Approximately 2.5mm steel thickness
Protective painted finish
Integrated battery and controller housing
IP66-rated housing
Designed to support compatible CCTV and PTZ cameras
PACKAGE INCLUDES
2 × 20W monocrystalline solar panels
1 × Heavy-duty steel camera mounting bracket and battery housing
1 × Integrated 128Wh LiFePO4 battery
1 × Integrated solar charge controller
SECURITY CAMERA IS NOT INCLUDED.
COMPATIBILITY REQUIREMENTS
Before ordering, confirm that the camera:
Operates on 12V DC power
Uses a compatible 2.1mm DC power connector
Has the correct connector polarity
Does not exceed 2.5A maximum current consumption
Can be safely attached to the supplied mounting bracket
Do not connect a camera requiring more than 12V DC or more than 2.5A.
INSTALLATION AND PERFORMANCE NOTICE
Solar performance depends on the installation angle, geographic location, season, weather, temperature, available sunlight, shading, camera power consumption and frequency of live viewing. Continuous year-round operation cannot be guaranteed in every location or with every camera.
Install both solar panels where they can receive adequate, unobstructed sunlight. Approximately eight hours of suitable daylight is recommended. After a complete battery discharge, the system may require several days of good sunlight to recharge fully.
The manufacturer estimates that approximately 40 hours of good sunlight over three to five days may be required to restore a deeply discharged battery fully. Actual charging time will vary according to weather, installation and connected-camera consumption.
The solar panels and steel mounting bracket are larger than they may appear in photographs and will protrude from the mounting surface. Confirm the available installation space, mounting structure, camera voltage, connector size, polarity and power requirements before ordering.
Professional installation is strongly recommended.